Toyota AVENSIS 1999 Supplement Manual page 121

OK
3 Check airbag sensor assembly.
Curtain
Shield
Airbag
Squib (LH)
→ ←
ICL– ICL+
Check Connector
E1
Tc
H01023
H02144
AB0118 AB0119
R13006 H11648
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
Airbag
Sensor
Assembly
(c)
ACC ON
CHECK:
(a)
or
(b)
(c)
DTC 87
(d)
(e)
H11829
OK:
HINT:
Codes other than code 87 may be output at this time, but they
are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Using a service wire, connect ICL+ and ICL– of the con-
nector (on the curtain shield airbag assembly side) be-
tween the curtain shield airbag assembly (LH) and airbag
sensor assembly.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON and wait at least for 20
seconds.
Clear DTC stored in memory.
(See page DI–153 of Pub. No. RM599E)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–152 of Pub. No. RM599E)
DTC 87 is not output.
NG Replace airbag sensor assembly.
DI–29