Toyota AVENSIS 1999 Supplement Manual page 109

4 Check curtain shield airbag squib (RH).
Curtain
→ ←
Shield
Airbag
Squib (RH)
ACC ON
or
Check Connector
Tc
E1
H01018
AB0118 AB0119
R13006
H11644
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
DIAGNOSTICS
PREPARATION:
(a)
Airbag
(b)
Sensor
Assembly
(c)
(d)
CHECK:
(a)
(b)
DTC 83
(c)
(d)
(e)
H11664
(f)
OK:
HINT:
Codes other than code 83 may be output at this time, but they
are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Turn ignition switch to LOCK.
Disconnect negative (–) terminal cable from the battery,
and wait at least for 90 seconds.
Connect the curtain shield airbag assembly (RH) connec-
tor.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to LOCK, and wait at least for 20 se-
cond.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Clear DTC stored in memory.
(See page DI–153 of Pub. No. RM599E)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–152 of Pub. No. RM599E)
DTC 83 is not output.
NG Replace curtain shield airbag assembly (RH).
DI–17