Toyota AVENSIS 1999 Supplement Manual page 275

BO–4
Pillar Garniush
Cover
BODY
REMOVAL
1.
(a)
(b)
: Clip
(c)
(d)
(e)
(f)
(g)
H03507
(h)
2 Clips
H11626
NOTICE:
Protection range is from instrument panel to ceiling.
(i)
(j)
(k)
I12491
2.
Using a knife, cut off the moulding, as shown.
NOTICE:
Do not damage the body with the knife.
H03502
– WINDSHIELD
REMOVE THESE PARS
Remove the front wiper arms.
Remove the weatherstrip.
Remove the cowl louver.
Remove the sun visors and holders.
Remove the map light assembly.
Remove the assist grip.
Remove the upper part of front door opening trims.
w/ Curtain Shield Airbag:
(1) Using a screwdriver, raise the pillar garnish cover.
(2) Remove the bolt, pillar garnish cover and front pillar
garnish.
(3) Remove the 2 bolts.
(4) Pack the airbag with protection cover.
Remove the front pillar garnishes.
Remove the inner rear view mirror.
Remove the upper back panel hole No.1 cover.
REMOVE WINDSHIELD OUTSIDE UPPER MOULDING
BO2J0–01