Toyota AVENSIS 1999 Supplement Manual page 156

MANUAL TRANSAXLE (E251)
SST
– INPUT SHAFT
4. MEASURE 3RD GEAR THRUST CLEARANCE
(See page MX–24)
5. INSTALL SPACER, SYNCHRONIZER RING, NEEDLE
ROLLER BEARING, 4TH GEAR AND REAR BALL
BEARING
(a) Install the spacer.
(b) Apply MP grease to the needle roller bearings.
(c) Place the synchronizer ring on the gear and align the ring
slots with the shifting keys.
(d) Install the 4th gear.
(e) Using SST and a press, install the rear ball bearing.
N00494
SST
6. INSTALL SNAP RING
(a) Select a snap ring that allows the minimum axial play.
Mark Thickness mm (in.)
1
2
3
4
(b) Using a screwdriver and hammer, tap in the snap ring.
Q00118
7. MEASURE 4TH GEAR THRUST CLEARANCE
(See page MX–24)
09506–35010
Mark
2.35 (0.0925)
2.40 (0.0945)
2.45 (0.0965)
2.50 (0.0984)
Thickness mm (in.)
5 2.55 (0.1004)
6 2.60 (0.1024)
7 2.65 (0.1043)
8 2.70 (0.1063)
MX–29