RS–18
REPLACEMENT
REPLACEMENT REQUIREMENTS
In the following cases, replace the side airbag assembly or seatback cover.
If the side airbag has been deployed.
If the side airbag has been found to be faulty in troubleshooting.
If the side airbag assembly has cut during checking items.
(See page RS–11)
If the seatback cover has cut and frayed seams during checking items.
(See page RS–11)
If the side airbag assembly has been found to be faulty during checking
items. (See page RS–11)
If the seatback cover has been found to be faulty during checking items.
(See page RS–11)
If the seatback frame assembly has been dropped.
CAUTION:
For removal and installation of the side airbag assembly, see page RS–10 and RS–19. Be sure to fol-
low the correct procedure.
SUPPLEMENTAL RESTRAINT SYSTEM
Case
–
SIDE AIRBAG ASSEMBLY
Side airbag assembly
Side airbag assembly
Side airbag assembly
Seatback cover
Side airbag assembly
Seatback cover
Side airbag assembly
Replacing part
RS0IP–01