Toyota AVENSIS 1999 Supplement Manual page 278

BO2820
BO4421
Primer M
Primer M
Adhesive
H02865
Primer G
N10230
– WINDSHIELD
BODY
5. POSITION GLASS
(a) Place the glass in the correct position.
(b) Check that all contacting parts of the glass rim are perfect-
ly even.
(c) Place reference marks between the glass and body.
(d) Remove the glass.
6. CLEAN CONTACT SURFACE OF GLASS
Using a cleaner, clean the contact surface which is black–col-
ored area around the entire glass rim.
NOTICE:
Do not touch the glass face after cleaning it.
7. COAT CONTACT SURFACE OF BODY WITH PRIMER
"M"
Using a brush, coat Primer M to the exposed part of body on the
vehicle side.
NOTICE:
S
Let the primer coating dry for 3 minutes or more.
S
Do not coat Primer M to the adhesive.
S
Do not keep any of the opened Primer M for later use.
8. COAT CONTACT SURFACE OF GLASS WITH PRIMER
"G"
(a) Using a brush or sponge, coat the edge of the glass and
the contact surface with Primer G.
(b) Before the primer dries, wipe it off with a clean shop rag.
NOTICE:
S
Let the primer coating dry for 3 minutes or more.
S
Do not keep any of the opened Primer G for later use.
BO–7