Toyota AVENSIS 1999 Supplement Manual page 313

Drive Belt
Idle Pulley Lock Nut
AIR CONDITIONING
INSTALLATION
INSTALL DRIVE BELT
(a) Tighten the idle pulley lock nut temporarily.
Adjusting Bolt
Torque: 2.5 N·m (25 kgf·cm, 22 in.·lbf)
(b) Install the drive belt.
(c) Using a adjusting bolt, adjust drive belt tension.
Drive belt tension:
New belt: 520 – 755 N (53 – 77 kgf)
I02286
Used belt: 196 – 392 N (20 – 40 kgf)
(d) Tighten the idle pulley lock nut at regular torque.
Torque: 39 N·m (390 kgf·cm, 29 ft·lbf)
– DRIVE BELT (1CD–FTV)
AC–3
AC2A6–01