Flushing - Graco Reactor 2 Repair Parts

Flushing

Flushing Flushing
To avoid fire and explosion:
• Flush equipment only in a well-ventilated
area.
• Do not turn on heaters until fluid lines are
clear of solvent.
• Flush out old fluid with new fluid, or flush
out old fluid with a compatible solvent before
introducing new fluid.
• Use the lowest possible pressure when
flushing.
• All wetted parts are compatible with common
solvents. Use only moisture-free solvents.
334946J
To flush feed hoses, pumps, and heaters
separately from heated hoses, set PRESSURE
RELIEF/SPRAY valves (SA, SB) to PRESSURE
RELIEF/CIRCULATION
lines (N).
To flush entire system, circulate through gun
fluid manifold (with manifold removed from
gun).
To prevent moisture from reacting with
isocyanate, always leave the system
filled with a moisture-free plasticizer
or oil. Do not use water. Never leave
the system dry. See
Component Material Information, page
Flushing
. Flush through bleed
Important Two-
7.
51