Flushing
WARNING
Read warnings, page 8. Flush equipment only in a
well-ventilated area. Do not spray flammable fluids. Do
not turn on heaters while flushing with flammable sol-
vents.
•
Flush out old fluid with new fluid, or flush out old
fluid with a compatible solvent before introducing
new fluid.
•
Use the lowest possible pressure when flushing.
•
All fluid components are compatible with common
solvents. Use only moisture-free solvents.
309812D
•
To flush feed hoses, pumps, and heaters separately
from heated hoses, set PRESSURE
RELIEF/SPRAY valves (SA, SB) to PRESSURE
RELIEF. Flush through bleed lines (N).
N
•
To flush entire system, circulate through gun fluid
manifold (with manifold removed from gun).
•
Always leave some type of fluid in system. Do not
use water.
Flushing
SA
SB
N
TI3593a
37