Replace Electric Motor - Graco Reactor 2 Repair Parts

Replace Electric Electric Motor
Replace Replace Electric
Remove
Remove Remove
NOTICE NOTICE NOTICE
Be careful not to drop or damage the motor.
The motor is heavy and may require two
people to lift.
1. Follow Shutdown, page
2. Open electrical enclosure. Disconnect the
A side heater connector from the TCM. See
Electrical Schematics, page
electrical enclosure door.
3. Remove mounting bolts from the bottom
frame and move the system away from the
wall.
Figure 2
4. Remove upper bolts (3). Tilt the electrical
enclosure down to gain access to the motor
cover.
334946J
Motor
Motor
50.
105. Close the
5. Remove motor and belt covers (123, 131,
132). Lift cover (132) and loosen the blue
bracket (131) fasteners. Lift the blue bracket
(133) off of the fasteners and set aside.
Remove the belt covers (131, 132).
Figure 3 Motor and Belt Covers
Figure 4 Heater and Belt Covers
Repair
59