Pumpline Disassembly - Graco Reactor 2 Repair Parts

Pumpline Disassembly

Disassembly
Pumpline Pumpline Disassembly
1. Follow the Pressure Relief Procedure, page
49.
2. Remove plug fitting (206) from lube cylinder
(205).
3. Insert clevis pin removal tool 296607
through opening in lube cylinder (205) and
screw tool into left clevis pin (219). Pull
clevis pin out of clevis (117).
4. Use hex key to remove four socket head cap
screws (203) from left proportioning pump
(202). Remove left proportioning pump.
5. Remove lube cylinder (205).
6. Screw pin removal tool 296607 into right
clevis pin (219). Pull clevis pin out of clevis
(117).
334946J
7. Use hex key to remove four socket head cap
screws (203) on right proportioning pump
(202). Remove right proportioning pump.
Repair
53