CVT REASSEMBLY
PRIMARY PULLEY ASSEMBLY
Wear clean protective gloves.
• Degrease the inside of the CVT cover and CVT casing com-
pletely with a cleaning solvent by using a clean rag.
• Install the O-ring 1 and shim 2.
If any of the primary pulley, CVT casing or CVT cover
has been replaced, install the shim whose thickness
has been adjusted in the shim adjustment procedure.
• Turn the slide pulley gear and close the primary pulley.
• Align the cutaway B of the screw shaft with the protrusion A.
Degrease the primary pulley faces completely.
CVT
5-19