Suzuki AN650 2002 Service Manual page 323

DUST SEAL
Inspect the wheel dust seal lip for wear or damage. If any dam-
ages are found, replace the dust seal with a new one.
• Remove the dust seal with the special tool.
09913-50121: Oil seal remover
Do not reuse the removed dust seal.
BEARING
Inspect the play of the wheel bearings by hand while they are in
the wheel. Rotate the inner race by hand to inspect for abnormal
noise and smooth rotation. Replace the bearing if there is any-
thing unusual.
• Remove the wheel bearings by using the special tool.
09921-20240: Bearing remover set
The removed bearings must be replaced with the new
ones.
CHASSIS 9-51