6-56
FI SYSTEM/ CVT SYSTEM
SENSORS
THROTTLE POSITION SENSOR (TPS) SETTING
• After all adjustments are completed, check or adjust the TPS
setting condition.
TPS SETTING PROCEDURE (
6-20)
CMP SENSOR
The signal rotor is installed on the exhaust camshaft, and the
camshaft position sensor (Pick-up coil) is installed on the cylin-
der head cover. (
6-27)
CKP SENSOR
The signal rotor is mounted on the generator rotor, and the
crankshaft position sensor (Pick-up coil) is installed above the
rotor. (
6-28)
IAP SENSOR
The intake air pressure sensor is located at the right side of the
air chamber. (
6-29)