Suzuki AN650 2002 Service Manual page 147

SECONDARY PULLEY REASSEMBLY
• Fit the special tool and install a new bearing by a hydraulic
press.
09913-75810: Bearing installer
Replace the removed bearing with a new one.
• Install the snap ring.
09900-06107: Snap ring pliers
• Apply THREAD LOCK "1342" to the secondary pulley fan
bolts and tighten them.
99000-32050: THREAD LOCK "1342"
CVT BELT INSPECTION
• Check that the drive belt is free from any greasy substance.
• Inspect the CVT belt for cracks or uneven wear.
• If any damages are found, replace the CVT belt with a new
one.
* If the CVT belt is found greasy, replace it with a new
one.
* Do not spray a cleaning solvent directly on the CVT
belt.
CVT 5-13
Bearing