Suzuki AN650 2002 Service Manual page 80

VALVE GUIDE SERVICING
• Using the valve guide remover, drive the valve guide out
toward the intake or exhaust camshaft side.
09916-53310: Valve guide remover/installer
NOTE:
* Discard the removed valve guide subassemblies.
* Only oversized valve guides are available as replacement
parts. (Part No. 11115-33D71)
• Refinish the valve guide holes in cylinder head with the
reamer and handle.
09916-34561: Valve guide reamer
09916-34542: Reamer handle
When refinishing or removing the reamer from the
valve guide hole, always turn it clockwise.
• Apply engine oil to the valve guide hole.
• Drive the valve guide into the hole using the special tool.
09916-43210: Valve guide installer/remover
NOTE:
Install the valve guide until the attachment contacts with the cyl-
inder head.
09916-43210: Valve guide remover/installer
09916-44930: Valve guide installer attachment
Failure to oil the valve guide hole before driving the
new guide into place may result in a damaged guide or
head.
• After installing the valve guides, refinish their guiding bores
using the reamer.
• Clean and oil the guides after reaming.
09916-33310: Valve guide reamer
09916-34542: Valve guide reamer handle
NOTE:
Insert the reamer from the combustion chamber and always turn
the reamer handle clockwise.
ENGINE
Valve guide
Cylinder head
3-29