Suzuki AN650 2002 Service Manual page 86

CYLINDER BORE
• Check the cylinder bore for stepped wear or scars.
• Measure the 6 positions as shown in the right figure with a cyl-
inder gauge.
09900-20508: Cylinder gauge set
Cylinder bore:
Standard: 75.500 – 75.515 mm (2.9724 – 2.9730 in)
Service Limit: 75.585 mm (2.9758 in)
• Fit the O-ring 1 to the water pipe and install the water pipe to
the cylinder.
• Coat the water pipe bolt with screw lock agent and tighten the
water pipe with the bolt.
99000-32050: THREAD LOCK "1342"
Use new O-rings.
• Install the thermostat to the cylinder.
• Tighten the thermostat case bolt.
NOTE:
Position the thermostat jiggle valve as shown in the photo.
ENGINE 3-35