Remounting - Suzuki AN650 2002 Service Manual

• Remove the swingarm pivot bearing with the special tools.
09921-20240: Bearing remover set
Do not reuse the removed bearings.
• Install the bearing with the special tool.
09913-70210: Bearing installer set
BUSHING
Inspect the bushing for damage. If any defects are found,
replace it with a new one.

REMOUNTING

Remount the swingarm in the reverse order of disassembly and
removal, and pay attention to the following points:
• Apply SUZUKI SUPER GREASE "A" to the bearing, and then
install the bearing.
99000-25010: SUZUKI SUPER GREASE "A"
• Install the dowel pins 1.
• Install the swingarm.
• Apply THREAD LOCK SUPER "1322" to the swingarm bolts.
• Tighten the swingarm bolt.
99000-32110: THREAD LOCK SUPER "1322"
CHASSIS 9-61