GENERATOR
• Wipe off the oily from the tapered part of the crankshaft.
• Install the key.
• Install the stator coil 1 and CKP sensor 2.
• Fit the grommet firmly.
• Using the special tool, tighten the generator rotor nut to the
specified torque.
09930-40113: Rotor holder
Generator rotor bolt: 160 N·m (16.0 kgf-m, 115.5 lb-ft)
• Install the oil sump filter.
NOTE:
Set the projection of the oil sump filter to concave of the crank-
case.
• Install the new gasket.
ENGINE
3-67