• Tighten the primary pulley shaft bolt to the specified torque
with the special tools.
Primary pulley shaft bolt: 64 N·m (6.4 kgf-m, 46.5 lb-ft)
09920-31010: CVT primary pulley shaft holder
09920-31020: Extension handle
• Fix the CVT casing securely with its mating face positioned
horizontally.
• With the straightedge placed on the casing mating face, mea-
sure the height H to the face B of the primary pulley assem-
bly using the vernier calipers.
• Measure the height H at three points and note the measured
value H
, H
and H
.
1
2
3
09900-20102: Vernier calipers
D
H
CVT
5-17