Setting up the N-560
List of Components
16
WARNING: Do not use an N-560, sensor, cables, or connectors that
appear to be damaged.
WARNING: The N-560 is not defibrillator-proof. However, it may
remain attached to the patient during defibrillation or while an
electrosurgical unit is in use, but the readings may be inaccurate
during use and shortly thereafter.
WARNING: In the USA, do not connect the N-560 to an electrical
outlet controlled by a wall switch because the N-560 may be
accidentally turned off.
WARNING: Use only the DOC-10 pulse oximetry cable with the
N-560. Use of another sensor cable will have an adverse effect on
performance. Do not attach any cable that is intended for computer
use to the sensor port. Do not connect any device other than a
Nellcor-approved sensor to the sensor connector.
• N-560 Pulse Oximeter
• Nellcor Sensor or Assortment Pack
• DOC-10 Pulse Oximeter Cable
• N-560 Operator's Manual
• Hospital-Grade Power Cord or power cord appropriate for
country of sale
• Sensor Accuracy Grid
• Quick Guide