Table of Contents
Advertisement
N-560 Operator's Manual
•
All indicators illuminate
•
All segments of all numeric digits light and change from red to
green
•
All segments of the
•
All segments of the SatSeconds indicator light
5. Once the display test portion of POST is complete, the N-560
software version is displayed for approximately 2 seconds.
Note: The device version illustrated is only a sample. The device version
identifies the hardware configuration and the software revision.
Device version numbers are often needed when calling Nellcor's
Technical Services Department, 1.800.635.5267, or your local
Nellcor representative for technical assistance. Write down the
numbers and have them available prior to requesting technical
assistance.
6. If the N-560 detects an internal problem during the self-test, an alarm
tone sounds and the N-560 displays an Error Code and the
corresponding number. See Troubleshooting on page 75.
Display light
Pulse Amplitude
Using the N-560
23
Advertisement
Table of Contents
