Gen-Lock Menu - GRASS VALLEY Ignite SDC Series Instruction Manual

Gen-Lock Menu

Ignite SDC/HDC Robotic Camera Instruction Manual
The GEN-LOCK menu is shown in
described in Table 48.
Figure 68. GEN-LOCK Menu
** GEN-LOCK **
GEN-LOCK INPUT :BNC
H PHASE-COARSE :+00
H PHASE-FINE :+000
SD HD PHASE CRS :+0
SD HD PHASE FINE :+00
Table 48. GEN-LOCK Menu Selections
Selection
GEN-LOCK INPUT [BNC, DSUB]
H PHASE-COARSE
[–40 to +40 (720 mode)]
[–60 to +60 (1080 mode)]
H PHASE-FINE [–45 to +45]
SD HD PHASE CRS [–4 to +4]
SD HD PHASE FINE [–99 to +99]
Figure 68. Menu selections are
Description
For selecting whether the sync signals are to be input from the BNC or D-
SUB connector.
For roughly adjusting the horizontal phase.
For finely adjusting the horizontal phase.
For roughly adjusting the phase of the HD video signals when SD sync
signals have been input.
For finely adjusting the phase of the HD video signals when SD sync sig-
nals have been input.
Menu Selections
97