To Return To Initial Settings - GRASS VALLEY Ignite SDC Series Instruction Manual

Appendix A — SD (NTSC) Camera Block

to Return to Initial Settings

56
Table 14. Other Settings
Selection
Aspect Ratio
Fan SW
Language
1. Select [Initialize Data] on the main menu screen of each Use Mode.
Press the YES/ABC switch, then the [Initialize Data] screen
shows for about 10 seconds.
Figure 30. Initialize Data Screen
2. Press the YES/ABC switch within about 10 seconds to return to the
initial settings (Table 15
initialized (Figure
Figure 31. Data Initialized Screen
3. If the NO/BAR switch is pressed, or if the YES/ABC switch is not
pressed, within about 10 seconds
main menu, then the existing settings are not initialized.
Description
Aspect ratio can be selected from 16:9 or 4:3.
OFF: Select this setting to stop the fan when its operating sound is found to
be bothersome in a studio or other such environment.
Auto: The temperature is detected automatically, and the fan starts operat-
ing when the temperature exceeds approx. 95 ºF (35 ºC)
English: Menu screen is displayed in English. Japanese: Menu screen is
displayed in Japanese.
and Table 16), the existing settings are
31), and the camera returns to main menu
(Figure
Ignite SDC/HDC Robotic Camera Instruction Manual
(Figure
32), and the camera returns to
30)