Table of Contents
Advertisement
Installation
Unpacking
Installation Procedures
General
Ignite SDC/HDC Robotic Camera Instruction Manual
Check all parts received against the packing list enclosed with your ship-
ment, and examine the equipment for any shipping damage. Immediately
report any missing or damaged items to the carrier and to your Grass
Valley Service Representative (See
Keep all manuals supplied with your equipment. You will need them to
complete the installation procedures.
Before you can use your Ignite SDC/HDC robotic camera, you must:
1. Mount the robotic assembly onto a tripod (or other mounting surface).
2. Install the optional prompter onto the robotic pan/tilt head assembly.
3. Install the camera/lens assembly onto the prompter, or directly onto
the robotic pan/tilt head (if the optional prompter was not purchased).
4. Connect cables.
Section
Contacting Grass Valley on page
2
4).
23
Advertisement
Table of Contents
