Mode Menu - GRASS VALLEY Ignite SDC Series Instruction Manual

Appendix C — HD Camera Block

Mode Menu

94
The MODE menu is shown in
Table 46.
Figure 66. MODE Menu
MODE (1/2) **
**
D5600K :OFF
GAIN SELECT :LOW
CAM ID :BAR
CAM ID POSI :1
MATRIX TABLE :OFF
COLOR CORRECTION :OFF
DIGITAL EXTENDER :OFF
BAR SEL :FULL (16:9)
FORMAT :1080/59.94i
Table 46. MODE Menu Selections
Selection
D5600K [OFF, ON]:
When the VIDEO MENU is
selected.
LIGHTING [TUNGSTEN,
DAYLIGHT]:
When the FILM MENU is
selected
GAIN SELECT
[LOW, MID, HIGH, S.GAIN1 to 3]
CAM ID [OFF, BAR, ON]
CAM ID POSI [0 to 3]
MATRIX TABLE [OFF, A, B]
COLOR CORRECTION [OFF, ON]
DIGITAL EXTENDER [OFF, ON]
BAR SEL
[FULL (16:9), FULL (4:3),
SMPTE (16:9), SMPTE (4:3),
ARIB]
Figure 66. Menu selections are described in
** MODE (2/2) **
STATUS
MENU ON BAR
MENU SEL
FAN
Description
For electrically compensating for a color temperature of approximately
5,600K.
For selecting LOW, MID, HIGH, S.GAIN1, S.GAIN2 or S.GAIN3 as the gain
setting.
For selecting how the camera ID is to be displayed.
OFF: The camera ID is not displayed.
BAR: The camera ID is displayed only in the color bar mode.
ON: The camera ID is displayed at all times.
For selecting where the camera ID is to be displayed.
CAM1
0
2
CAM1
0: top left,
1: top right,
2: bottom left,
3: bottom right
For selecting OFF, A or B as the matrix setting.
For turning the color correction function ON or OFF.
For digitally doubling the images when set to ON.
For selecting the color bars. Select the 4:3 color bars for down-conversion
at the system side. The color bars and characters will then be contained
within the 4:3 picture angle.
Ignite SDC/HDC Robotic Camera Instruction Manual
:OFF
:OFF
:VIDEO MENU
:AUTO
CAM1
1
3
CAM1