Appendix C - Hd Camera Block; Controls And Indicators - GRASS VALLEY Ignite SDC Series Instruction Manual

HD Camera Block

Controls and Indicators

Ignite SDC/HDC Robotic Camera Instruction Manual
HD camera controls and indicators are shown in
in Table 33.
Figure 50. HD Camera Controls and Indicators
FRONT
1
Table 33. HD Camera Controls and Indicators
Item Name
1 Lens mount
2 Lens fixing ring knob
3 Interface connector (I/F)
Tally output connector
4
(TALLY OUT)
5 Iris connector (IRIS)
Zoom/Focus connector
6
(ZOOM/FOCUS)
DC 12 V input connector
7
(DC12V IN)
8 Operate indicator
14
13
12
11
2
10
9
8 7
Description
2/3" Standard bayonet type (B4) mount.
Rotate the lens fixing ring knob counterclockwise and remove the lens mount
cap. Mount the lens on the camera and rotate the lens fixing ring knob clockwise
in order to fix the lens securely.
Input terminal dedicated to control signals from an optional remote control box.
R tally and G tally outputs. These signals take effect when the optional card for
studio applications has been inserted.
Input terminal for lens with an iris control function.
Used to connect the zoom/focus control cables of lens.
12 V DC input.
Green LED illuminates to indicate DC power is supplied to the camera.
When the video format is changed, the operate LED flashes twice when the for-
mat is 720/60p and once with any other format.
C
Appendix
Figure 50 and described
REAR
3
4
5
6
79