Menu Selections; Use Mode Setting; Halogen Mode - GRASS VALLEY Ignite SDC Series Instruction Manual

Appendix A — SD (NTSC) Camera Block

Menu Selections

Use Mode Setting

Halogen mode

42
Table 3. SD Camera Controls and Indicators
Item Name
10 SDI OUT 1 and 2
11 NO/BAR switch (NO/BAR/–)
YES/ABC switch
12
(YES/ABC/+)
ITEM/AWC switch
13
(ITEM/AWC/S)
14 MENU switch (MENU/A)
Tally light (located on top of
15 camera body, but not illus-
trated)
You can adjust camera settings via on-screen menus by using the controls
on the back of the camera block or by using the JSC-2300 SHOT Director
robotics/camera controller. These adjustments should be performed by
qualified technical personnel only. If your system includes a JSC-2300
SHOT Director, always use the JSC-2300 SHOT Director LCD menus to
make these adjustments.
The camera has four use modes, and various functions for four use modes
have been preset. Functions can be set as best suited to each use mode.
Note Cameras come from the factory set in User Mode, which allows the greatest
flexibility of settings. Other modes have many of the settings pre-determined
which may or may not work in a particular application.
Suited to indoor shooting, such as at weddings, parties, lecture meetings,
events, etc. Settings can be changed using a simple menu.
Description
SDI video outputs (SDI Option card)
When the camera is in shooting mode (menu not displayed), the color bar and
shooting conditions are alternately indicated by pressing the switch.
With the Main Menu displayed, you can scroll down to any Sub Menu.
With a Sub Menu displayed, you can reduce the value of any setting.
When the camera is in shooting mode (menu not displayed), the automatic
black balance control can be set with this switch.
With the Main Menu displayed, you can scroll up to any Sub Menu.
With a Sub Menu displayed, you can increase the value of any setting.
When the camera is in shooting mode (menu not displayed), the automatic
white balance control can be set with this switch.
With a menu displayed, any item can be selected by pressing this switch.
A menu will appear on the monitor screen when this switch is pressed for
about 5 seconds. This item can be selected by pressing the switch while the
menu is on the screen.
Dual-color LED
Red - On Air
Amber - Next Camera
Requires dry contact tally control
Ignite SDC/HDC Robotic Camera Instruction Manual