Other Settings Overview - GRASS VALLEY Ignite SDC Series Instruction Manual

Appendix A — SD (NTSC) Camera Block

Other Settings Overview

48
Table 7. Sharpness (DTL) Settings
Selection
Clean DNR
Flesh Noise Sup.
Figure 23. Other Settings Submenu
Table 8. Other Settings
Selection
Contrast (Gamma)
Shutter Speed
Description
(OFF, Low, High) This enables the clean DNR effect to be selected.
(OFF, Low, High) Flesh noise is suppressed in two steps when the Level
setting is at High or Low.
Description
(Low, Mid, High) Contrast can be adjusted to any of three levels.
OFF: Electronic shutter is turned off.
1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000:
Electronic shutter operates at one of these speeds as selected.
S/Scan (Synchro Scan): Electronic shutter operates at the speed set with
the Synchro Scan setting.
Auto ND: Electronic shutter is controlled to automatically adjust the lumi-
nance.
*Flickering may increase at Auto ND under fluorescent lights. *Auto ND is
automatically selected if Auto ND (ELC) setting is set to ON.
Ignite SDC/HDC Robotic Camera Instruction Manual