Default And Recommended Camera Id And Ip Addresses - GRASS VALLEY Ignite SDC Series Instruction Manual

Appendix D — Robotic (Pan/Tilt Head)

Default and Recommended Camera ID and IP addresses

108
Table 55. Robotic Pan/Tilt Head Controls and Indicators
Item Name
6 DB15 connector
7 DB9 connector
8 8" pedestal mount
Zero degree pan
9
registration mark
10 Camera mount L-bracket
The pan/tilt head and JSC-2300 SHOT Director are factory set to default IP
addresses to allow the units to communicate initially. If you are connecting
multiple cameras, you will need to set each camera, one at a time, before
connecting the next camera to the network, to a unique ID and IP address
using the JSC-2300 SHOT Director.
Table 56 lists the default and recommended IP addresses for cameras 1
through 16.
Table 56. Default and Recommended IP Addresses for Cameras 1-16
Camera Number/ID
CAM16
CAM15
CAM14
CAM13
CAM12
CAM11
CAM10
CAM9
CAM8
CAM7
CAM6
CAM5
CAM4
CAM3
CAM2
CAM1
Note The default IP address for the SHOT Director is 192.168.0.100 with a subnet
mask of 255.255.255.0. If you add SHOT Directors to the network, use IP
addresses 192.168.0.101 through 192.168.0.110.
Description
Camera control cable provides serial control and 12 V dc power from the pan/
tilt head to the camera block.
Zoom/focus to lens
Extension pedestal mount.
Used to verify that the pan/tilt head is pointed in the correct direction prior to
mounting.
Used to mount camera or prompter
Recommended IP Address
192.168.0.126 (default)
192.168.0.125
192.168.0.124
192.168.0.123
192.168.0.122
192.168.0.121
192.168.0.120
192.168.0.119
192.168.0.118
192.168.0.117
192.168.0.116
192.168.0.115
192.168.0.114
192.168.0.113
192.168.0.112
192.168.0.111
Ignite SDC/HDC Robotic Camera Instruction Manual