Appendix D - Robotic (Pan/Tilt Head); Controls And Indicators - GRASS VALLEY Ignite SDC Series Instruction Manual

Robotic (Pan/Tilt Head)

Controls and Indicators

Ignite SDC/HDC Robotic Camera Instruction Manual
Robotic pan/tilt head controls and indicators are shown in
described in Table 55.
Figure 74. Robotic Pan/Tilt Head Controls and Indicators
1 2
10
9 8
FRONT
Table 55. Robotic Pan/Tilt Head Controls and Indicators
Item Name
Zero degree tilt
1
registration hole
2 Robotic pan/tilt head
3 Reset switch
4 Ethernet connector
Amphenol circular
5
connector
REAR
Description
Used to orient the pan/tilt head in the desired direction prior to mounting.
Contains the electro-mechanical assemblies necessary to perform pan/tilt
movement.
Resets the pan/tilt head to default IP addresses 192.168.0.126 and subnet
mask to 255.255.255.0. Also sets controller (SHOT Director) address to
192.168.0.100.
IP control/communication from subnet hub
48 V dc power supply input
D
Appendix
Figure 74 and
3
7 6 5 4
107