Fluorescent Mode; Outdoor Mode; User Mode; Setting By Camera - GRASS VALLEY Ignite SDC Series Instruction Manual

Fluorescent mode

Outdoor mode

User mode

Setting by Camera

Ignite SDC/HDC Robotic Camera Instruction Manual
Suited to indoor shooting under fluorescent lighting. Settings can be
changed using a simple menu.
Suited to outdoor shooting. Settings can be changed using a simple menu.
Settings can be changed using a detail menu.
1. Turn the camera on while keeping the MENU switch
depressed.
2. The use mode setting menu
and one of the use mode blinks .
Figure 17. Use Mode Setting Menu
3. Press the MENU switch, ITEM/AWC switch, or NO/BAR switch to let
the desired use mode blink.
• MENU switch: The blinking item moves up one.
• ITEM/AWC switch, NO/BAR switch: The blinking item moves down
one.
4. Press the YES/ABC switch. The blinking use mode comes into effect.
After the use mode setting menu is shown for about 5 seconds, the
camera returns to ready and operates in the selected use mode.
(Figure 17) appears on the monitor screen
Menu Selections
(Figure 16)
43