Ethernet Hub; Optional Mounting Hardware; Functional Description; Robotic Camera - GRASS VALLEY Ignite SDC Series Instruction Manual

Ethernet Hub

Optional Mounting Hardware

Functional Description

Robotic Camera

Ignite SDC/HDC Robotic Camera Instruction Manual
An Ethernet hub, (10/100/1000 Base TX, auto-sensing) is required to
connect up to 16 Ignite SDC/HDC robotic cameras to a JSC-2300 SHOT
Director robotics/camera controller.
The following optional mounting hardware is recommended for use with
Ignite SDC/HDC robotic cameras.
• Tripod
• Tripod mounting plate
• Wall mount
• Environmental dome
The SDC/HDC robotic camera receives TCP/IP control inputs (pan/tilt/
zoom/focus) from the JSC-2300 SHOT Director robotics/camera controller
(Figure 2).
Figure 2. SDC/HDC Robotic Camera Functional Block Diagram
SDC/HDC
ROBOTIC CAMERA
PAN/TILT
JSC-2300 TCP/IP
ROBOTIC
SHOT DIRECTOR
HEAD
ROBOTIC/CAMERA
CONTROL
UP TO 15
ADDED
CAMERAS
VIDEO
SDI VIDEO
EQUIPMENT
RED TALLY (ON AIR)
TALLY
AMBER TALLY (NEXT CAM)
CONTROL
SCRIPT
VGA
SERVER
LENS
ZOOM,
FOCUS
CTRL, IRIS
PWR
SDC/HDC
CAMERA
BLOCK
G/L, SYNC
(FROM
FACILITY)
PROMPTER
Optional Mounting Hardware
19