Specifications - GRASS VALLEY Ignite SDC Series Instruction Manual

Robotic camera
Table of Contents

Advertisement

Appendix B — SD (PAL) Camera Block

Specifications

78
SD (PAL) camera specifications are listed in
Table 32. SD Camera Specifications
Power Requirements
Optical System
Pickup Device
Total Pixels
Scanning System
SYNC System
Video Output
Std Illumination Color Temp
Minimum Illumination
S/N Ratio
Horizontal Resolution
Registration
Aspect Ratio Conversion
Contour Correction
White Balance
Black Balance
Chroma Variability
Encoding System
Gain Selection
Electronic Shutter Speed
CCD Readout Selection
Color Bars
Lens Mount
Lens Diaphragm
Selectors
Input/Output Connectors
Indicators
Allowable Temperature Range
Allowable Humidity Ranges
Dimensions (WxHxD)
Weight
Table
12 Vdc 15.4 W
2/3" Prism optical system, F1.4
2/3" Interline wide CCD
1008 (H)x591 (V) (About 540000 pixels)
629 lines, 50 fields, 25 flames
Internal: PAL standard
External: BBS or VBS (BNCx1, Dsub 50 Px1)
Composite: 1.0 Vp-p/75 Ohm (BNCx1, Dsub 50 Px1)
Y/C Y: 1.0 Vp-p/75 Ohm; C: 0.3 Vp-p/75 Ohm (burst) (Dsub 50 Px1)
Y/Pr/Pb Y: 1.0 Vp-p/75 Ohm; Pr, Pb: 0.525 Vp-p/75 Ohm (Dsub 50 Px1)
RGB G: 1.0 Vp-p/75 Ohm; RB: 0.7 Vp-p/75 Ohm (Dsub 50 Px1)
2,000 lx (F11, 3200 K)
0.4 lx (F1.7, Night Eye H)
63 dB (Y signal, DTL OFF, gamma OFF, DNR ON)
850 TV lines (high band DTL ON, center area)
0.05% (Entire screen, excluding effects of lens)
16:9, 4:3
Horizontal, vertical (2H)
AWC A, AWC B (R/B gain, painting), ATW, 3200K, 5600K preset
Auto (R/B pedestal, painting function)
7 levels
Y, R-Y, B-Y
0 to 30 dB in step, AGC, Night Eye L/H
1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, ELC, Synchro
scan (50.24 Hz to 15.63 kHz)
Field, Flame 1, Flame 2
Full
2/3" bayonet mount
Auto, Manual (Only with remote control) Adjust, On, Off
MENU
ITEM/AWC (AWC: when menu screen is not displayed)
YES/ABC (ABC: when menu screen is not displayed)
NO/BAR (BAR: when menu screen is not displayed)
VIDEO OUT: BNC connector
G/L IN: BNC connector
IRIS: 12 P round connector
DC 12 V IN: DC connector
I/F REMOTE: 50 P Dsub connector
Red LED: Power On
For storage: –4 °F to 140 °F (–20 °C to +60 °C)
For guaranteeing performance: 41 °F to 95 °F (+5 °C to +35 °C)
For guaranteeing operation: 14 °F to 113 °F (–10 °C to +45 °C)
For storage: 20% to 90%, for operation: 20% to 90%
3-5/16"x3-3/4"x7-9/16" (84x95x192 mm)
2.5 lbs (1.15 kg)
Ignite SDC/HDC Robotic Camera Instruction Manual
32.

Advertisement

Table of Contents
loading

Table of Contents