Appendix C — HD Camera Block
Skin Tone Detail Menu
88
The SKIN TONE DETAIL menu is shown in
described in
Table
40.
Figure 59. SKIN TONE DETAIL Menu
**
SKIN TONE DETAIL
**
SKIN TONE DTL
:OFF
SKIN GET
:OFF
SKIN DTL CORING
:5
Y MAX
:190
Y MIN
:010
I CENTER
:055
I WIDTH
:090
Q WIDTH
:010
Q PHASE
:+000
Table 40. SKIN TONE DETAIL Menu Selections
Selection
SKIN TONE DTL [OFF, ON]
SKIN GET [OFF, ON]
SKIN DTL CORING [0 to 7]
Y MAX [0 to 255]
Y MIN [0 to 255]
I CENTER [0 to 255]
I WIDTH [0 to 255]
Q WIDTH [0 to 255]
Q PHASE [–128 to +127]
Figure
Description
For turning the SKIN TONE DTL ON or OFF.
When ON is selected, the box cursor is output to the screen center. When
the image of the subject's skin is placed inside the box cursor and the
ENTER operation is performed, I CENTER and Q PHASE are set automati-
cally.
For setting the SKIN TONE DTL coring amount.
For setting the upper limit of the brightness in the skin tone specification
area.
For setting the lower limit of the brightness in the skin tone specification
area.
For setting the phase of the I axis in the skin tone specification area.
For setting the phase width of the I axis in the skin tone specification area.
For setting the phase range of the Q axis in the skin tone specification area.
For setting the phase of the Q axis in the skin tone specification area.
Ignite SDC/HDC Robotic Camera Instruction Manual
59. Menu selections are