Prompter Adapter Plate (Optional) - GRASS VALLEY Ignite SDC Series Instruction Manual

Prompter Adapter Plate (Optional)

Ignite SDC/HDC Robotic Camera Instruction Manual
Note The prompter assembly is supported by a mounting plate that sits beneath
the camera assembly.
1. Attach camera adapter plate to prompter adapter plate
Figure 8. Prompter and Camera Adapter Plates
Camera
adapter
plate
Mounting
plate
rods
Front
2. Attach the main body of the prompter adapter plate to the robotic pan/
tilt head assembly L-bracket so that the T-bolt end of the two rods
attached to the mounting plate extend to the front of the robotic pan/
tilt head assembly.
Installation Procedures
(Figure
Prompter
adapter
plate
8).
27