Agilent Technologies InfinityLab 1290 Infinity II User Manual page 35

3 LAN Configuration
TCP/IP Parameter Configuration
5 To change a parameter, follow the style:
6 When you have finished typing the configuration parameters, type
7 Restart the module for the new TCP/IP settings to be implemented.
Agilent InfinityLab ELSD User Manual
Parameter value, for example:
set network static=on
set network ip=156.141.59.43
Then press Enter.
Parameter refers to the configuration parameters that you are defining, and
value refers to the definitions you are assigning to the parameter. Each entry
is followed by a carriage return.
quit and press Enter to exit.
35