Agilent Technologies InfinityLab 1290 Infinity II User Manual page 40

3 LAN Configuration
PC and OpenLab CDS, OpenLab ChemStation or OpenLab EZChrom Software
Setup
5 Cooled option is selected by default. Therefore, deselect Cooled model option
6 Select OK to complete the configuration.
The detector's serial number is the default hostname.
NOTE
If the detector is assigned a temporary IP address (e.g DHCP server),
NOTE
communication with the software might be prevented following a power cycle of
the instrument.
Recommend using a static IP address to ensure communication with the
software is preserved after power cycle.
Agilent InfinityLab ELSD User Manual
if required.
40