Agilent Technologies InfinityLab 1290 Infinity II User Manual page 94

8 Maintenance
Updating Detector Firmware
3 Select Serial and choose the appropriate COM port, followed by OK.
4 From the toolbar menu, select Setup >Serial Port to configure the serial port
5 Set the Serial port to the parameters shown below and click OK.
Table 11
Firmware type
Main
Safety
Laser
Agilent InfinityLab ELSD User Manual
connection.
The Transmit delay values should be set according to the table below:
Transmit delay values
msec/char
0
0
0
msec/line
20
35
35
94