Agilent Technologies InfinityLab 1290 Infinity II User Manual page 32

3 LAN Configuration
TCP/IP Parameter Configuration
3 From the left menu, select Network to configure the TCP/IP settings.
4 To use a static IP address, select Use the following IP address.
5 Enter the module's IP Address, Subnet Mask, and Default Gateway address and
6 Select Apply again to confirm the changes.
7 Select Logout to close the session.
8 Restart the module for the new TCP/IP settings to be implemented.
Contact your system administrator for assistance on configuring the detector's
NOTE
network settings.
Changes to the TCP/IP parameters, other than those described, could render the
NOTE
ELSD inoperable.
Agilent InfinityLab ELSD User Manual
The detector can be configured to:
• obtain an IP address automatically (DHCP),
• use a static IP address,
• change Hostname (Advanced Network settings).
click Apply.
32