Before Using The Detector - Agilent Technologies InfinityLab 1290 Infinity II User Manual

4 Using the Module

Before Using the Detector

Before Using the Detector

On start-up of both the Agilent 1260 Infinity II ELSD (G4260B) or the Agilent 1290
Infinity II ELSD (G7102A), either Serial or LAN must be selected as the method of
communication.
If Serial communication is selected, then no further configuration is required.
If LAN communication is selected, further configuration of the network settings is
required (see chapter LAN Configuration).
Agilent InfinityLab ELSD User Manual 42