Language Setup; Viewing And Changing Setup From Fiery Websetup - Kyocera Ci1000 Operating Instructions Manual

6
6-18 Setup from the Control Panel and WebSetup
SERVER COMMENT
Use the arrow buttons to enter a comment about the printer (SMB server). This
name will identify the printer in the Windows Network Neighborhood. For
example, "Production use only." Once set, this comment will appear in the second
line of the LCD when the
is selected on a client machine, the server comment will appear under the Details
section of the Server information window.
DOMAIN NAME
Use the arrow buttons to enter the domain name or workgroup of the printer
(SMB server).

Language Setup

The Language Setup menus are used to select a language for the control panel.
English/French/Spanish [English*]
Select a language for the printer's control panel and Configuration page.

Viewing and changing Setup from Fiery WebSetup

After you have performed an initial Setup from the printer's control panel (see
page 6-1), you can use Fiery WebSetup to remotely view and modify Setup
options later.
Before you can access the Fiery WebTools, you must complete the following:
• Initial Setup, specifically, setting the printer's IP address, as well as its gateway,
subnet mask, and password (if they are used) from the control panel; see
page 6-1.
• The procedures described in "Setting up Fiery WebTools" on page 3-22.
screen is displayed. When the printer
SERVER COMMENT