Kyocera Ci1000 Operating Instructions Manual page 128

Final draft august 6, 1998
Hide thumbs Also See for Ci1000:
Table of Contents

Advertisement

6
6-28 Setup from the Control Panel and WebSetup
In the IPX Frames dialog box, select frames and use the Add and Remove buttons
to specify the selected frames.
PServer Setup tab
IPX (Novell NetWare) options are set in the PServer Setup tab.
You can modify both NetWare 3.x (Bindery) and NetWare 4.x (NDS)
configurations from Fiery WebSetup. Turn on the Enable NDS option if your
network uses NetWare 4.x in native mode. Click Bindery Setup if your network
uses NetWare 3.x or uses NetWare 4.x in bindery emulation mode.
If your network uses both NDS and Bindery, set up NDS first. Setting up
N
:
OTE
NDS after Bindery will overwrite Bindery Setup. If your network uses both NDS
and Bindery, including using NetWare 4.x servers in bindery emulation, the
Ci1000 cannot service NDS and bindery emulation servers on the same NDS
tree.
PServer Setup (NetWare Services)
The Enable PServer mode option must be turned on if you have a Novell server
connected. You can, however, change the PServer polling interval and then modify
either Bindery Setup or NDS Configuration.

Advertisement

Table of Contents
loading

Table of Contents