Kyocera Ci1000 Operating Instructions Manual page 108

6
6-8 Setup from the Control Panel and WebSetup
For more information on setting up TCP/IP printing using Ethernet, see
Chapter 3.
ETH IP ADDRESS
[127.000.000.001]
Use the arrow buttons to assign the printer an Ethernet IP address. Press Enter to
accept your selection.
ETH SUBNET MASK
[255.255.255.000]
This option lets you modify the subnet mask for printing with TCP/IP over
Ethernet. The subnet mask is set to
address and you need to set the subnet mask, enter one of the following values:
•
255.000.000.000
•
255.255.000.000
•
255.255.255.000
Be sure to confirm the subnet mask setting with your network administrator
before proceeding. In some cases the required setting may be different from those
listed.
The following options appear if an optional Token Ring card is installed on the
printer.
TCP/IP-TOKENRING
YES/NO [NO]
Select if you have TCP/IP network connected to the printer over Token Ring
YES
cabling.
TR IP ADDRESS
[127.000.000.001]
Use the arrow buttons to assign the printer a Token Ring IP address. Press Enter
to accept your selection.
255.255.255.000
if the IP address starts with a number less than 128
if the IP address starts with a number from 128 through 191
if the IP address starts with a number greater than 191
by default. If you set the IP