Kyocera Ci1000 Operating Instructions Manual page 195

8
8-11 Installing network cards
Connector cover
3. Align the network card into the cutout in the front of the video controller board
4. Secure the network card to the front bracket of the video controller board with
5. Replace the video controller board in the printer. For instructions, see "Removing
6. Enter the new Network Setup settings from the printer's front panel.
(1) and then into the network card connector (2).
one of the two screws you removed from the slot cover (3).
1
and replacing the video controller board" on page 8-1.
For information regarding setting up the printer for network printing, see
Chapter 6 of Operating Instructions.
3
2