Kyocera Ci1000 Operating Instructions Manual page 153

7
7-19 Clearing media jams
2. Turn the large green knob on the fuser counterclockwise and remove the media
from inside the access door.
C
AUTION
If the fuser knob will not turn, do not force it, or you may damage the fuser.
Instead, follow these steps:
a) Unlock the fuser by turning the small green thumbscrew counterclockwise.
b) Pull the fuser out. The media will probably tear.
c) Remove the oil supply roll.
d) Turn the fuser's large green knob to release the jammed media.
e) Remove the jammed media from the fuser and the printer.
S C
AFETY
The fuser is hot; to avoid personal injury, turn off the printer and wait 10 minutes
for the fuser to cool before touching it.
3. Close the front door.
:
:
AUTION