Kyocera Ci1000 Operating Instructions Manual page 43

2
2-17 Using the control panel
RESETS
SYSTEM SETUP
PS SETUP
VISUAL CALIBRATION
COLOR ADJUSTMENT
I/O PORT SETUP
NETWORK PROTOCOL SETUP
NETWORK SERVICE SETUP
PANEL LANGUAGE
Network Protocol Setup and Network Service Setup appear only for
N :
OTE
networked printers.
Choose:
Clearing the Job log and all print queues. With Format
Disk displayed, formats the hard disk (if a hard disk is
installed). With Reset Color displayed, resets printer's
color calibration to factory settings. With Restore
Defaults displayed, returns all modifiable settings to
their defaults. Restarts printer.
System information about the printer., such as: printer
name, the printing of start page at power on, the
creation of a printed queue, power saver settings, and
password to the printer's Setup menus.
PostScript settings for the printer.
Color calibration settings for the printer. For
information on VisualCal color calibration see Drivers
and Utilities.
Allows you to adjust the density and brightness of
toner. For information on Color Adjustment see
Drivers and Utilities.
Settings for the network and/ or parallel connections
to the printer
Settings for the network protocols
NDS (Novell Directory Services) or Bindery services
for the printer.
Choose the language for the control panel and the
pages you can print from the control panel.
To specify: