Kyocera Ci1000 Operating Instructions Manual page 164

7
7-30 Care and Maintenance
Exit the Menu mode by pressing the MENU/EXIT button.
Read the printer panel message to determine the printer status.
Turn the printer off and back on again. If the indicator is still on, the printer
requires service.
Correct the condition displayed on the printer panel (e.g., close the door or clear
the media jam).
Replace the color toner cartridge.
Try fresh paper, or another type of paper.
Store media in the original, dust-free package in the same environmental
conditions as the printer.
Check the density setting by printing the Color Calibration Page in the Color
Calibration menu from the printer panel. Compare the settings with the color
density samples on the Color Calibration Card and, if necessary, adjust the density
from the printer panel. Refer to Setting the Color Density on page 54.
Replace the color toner cartridge soon (depending on the complexity of your
prints, you can continue to print up to 100 more pages).
Replace the color toner cartridge.
Remove dust or stain from OHP transparency.
Run 20-30 prints. The impression will disappear with continued time and use.
Replace the imaging unit.
Replace the imaging unit.
Replace the imaging unit.