Kyocera Ci1000 Operating Instructions Manual page 95

5
5-17 Installing the PostScript Printer Driver for Windows 95
2. Click Add Port.
The available port types are displayed.
3. Select LPR Port and click New Port.
If the LPR port is not listed, install the TCP/IP protocols and Microsoft TCP/IP
Printing. For details, see your documentation for Windows NT.
4. In the "Add LPR compatible printer" dialog box, enter the IP address of the
Ci1000.
If your network uses Domain Name Services (DNS), enter the DNS name
assigned to the Ci1000 instead of the IP address.
5. Press Tab and type the internal name of the Ci1000 in lowercase letters.
Type this name exactly as shown; it is required for communication with the
N :
OTE
printer.
The name must be one of these:
xjdirect
xjhold
xjprint
Use the last two internal names only if your printer has a hard disk drive
N :
OTE
32 32
and a minimum of 32MB of memory.
6. Click OK.
The workstation checks the address or DNS name that you entered and notifies
you if it cannot resolve the address.
7. Close the Printer Ports property tab.
The Ports property tab shows the new port configuration.