Kyocera Ci1000 Operating Instructions Manual page 94

5
5-16 Installing Software for Windows
T C 1000
O PREPARE THE I
1. With the Ci1000 turned off, connect it to the network. Restart the printer.
2. Select NETWORK PROTOCOL SETUP. Enable TCP/IP and enter the appropriate
settings for IP address, subnet mask and gateway address.
For details, see "I/O Port Setup" on page 6-5.
3. Exit the setup menus.
The TCP/IP Protocol and Microsoft TCP/IP Printing software should already be
installed on the Windows NT 4.0 workstation.
T TCP/IP
O SET UP AND
1. Open the Printer Properties dialog box for the Ci1000. Click Ports to display the
Ports property tab.
TCP/IP LPR
FOR AND
LPR W
PRINTING FOR INDOWS
:
PRINTING
NT 4.0: